Holden Colorado RG1 Ambush Sheet Metal Hoop Bullbar

$3,095.00 inc. GST

Afterpay available for orders up to $2,000.00 Learn More

Product description

PSR has designed a functional and multi-vehicle Baja tub rack system for late model dual cab utes. Rack is fabricated from 42NB thinwall tube to keep weight down to a featherweight 36kg unlike others which can weigh over 55kg using standard size tube which puts major stress on tub sides which can ultimately end in cracking around the mounting area.

The rack has an adjustable leg system which allows the fitment to any tub with an internal minimum width of 1380mm to a maximum width of 1610mm, this not only allows easy installation but also if the time comes to sell the item your potential customer base is not limited to the one model.

Further to these functions there are 4 differing leg heights, 1/4 leg height sitting 105mm above top of tub line, 1/2 height at 230mm above tub line, 3/4 height at 405mm above tub line and Roof Height leg set which is based on individual vehicle heights to sit the top of the tubing 70mm above roof top to allow coupling to roof racks.

Single end bars are supplied with the rack and again are bolt on to allow fitment either front or rear depending on look and functionality, bars are also available to be purchased singularly to have a bar front and rear to pack items against.

Corner plates are cut and folded 5mm plate for ultimate strength and feature dimple dies and holes for mounting points. Single mounting points are fixed at each end also to allow triangular ratchet straps to be used to fix up to 35″ wheels either above or below rack, these can also be used as tie down points for strapping etc.

Racks are powder coated black. Rack basket outside area dimensions are 1050mm(W) X 1400mm(L) X 120mm(H).

Our unique design is proudly 100% Aussie made in-house at PSR headquarters, ADR tested and approved we offer a bar like no other on the market. Sleek lines, tough as nails design and a huge approach angle makes our bar tough to beat.

Ambush Bars are available in 5 different variations:

HooplessSheet Metal HoopLow Single HoopSingle HoopTriple Hoop

A huge feature of the Ambush Bar design allows a purchase as Hoopless and at a later stage a hoop variation can be added allowing you to change the look of the bar. This applies to the sheet metal or low hoop which are bolted to the bar, or if purchased initially will be supplied assembled to the bar.

Every Ambush Bar comes with built in high quality 4 LED driving lights which feature a 2 LED spot and 2 LED spread combo for optimum visibility in night time driving conditions and are backed by a 5 year warranty! Also supplied as standard is a PSR fairlead which is available in 2 variations of Slimline or Standard with a choice of silver or black which allows you again to tailor the look you desire!

Two paint options are available and all bars are professionally painted, NOT powdercoated. This allows a factory quality finish. Paint options are: Satin Black or Colour-Matched. Satin Black hoops are also available with Colour-Matched bars.

Our bar can be supplied in standard, 1″ and 2″ body lift configurations and adding to the versatility of the Ambush range mounts will be available to purchase separately, thus allowing adding or removing of body lift to accommodate bar position.

An infill is supplied with every bar and to add contrast is finished in charcoal grey. This unique addition is the PSR “Pre-Runner” infill.

Twin aerial mounts are also included as standard!

All Ambush Bars are compatible with the PSR Modulight range of LED lightbars.

 

EXTRA $110 FOR COLOUR MATCHED

Our unique design is proudly 100% Aussie made in-house at PSR headquarters, ADR tested and approved we offer a bar like no other on the market. Sleek lines, tough as nails design and a huge approach angle makes our bar tough to beat.

Ambush Bars are available in 5 different variations:

HooplessSheet Metal HoopLow Single HoopSingle HoopTriple Hoop

A huge feature of the Ambush Bar design allows a purchase as Hoopless and at a later stage a hoop variation can be added allowing you to change the look of the bar. This applies to the sheet metal or low hoop which are bolted to the bar, or if purchased initially will be supplied assembled to the bar.

Every Ambush Bar comes with built in high quality 4 LED driving lights which feature a 2 LED spot and 2 LED spread combo for optimum visibility in night time driving conditions and are backed by a 5 year warranty! Also supplied as standard is a PSR fairlead which is available in 2 variations of Slimline or Standard with a choice of silver or black which allows you again to tailor the look you desire!

Two paint options are available and all bars are professionally painted, NOT powdercoated. This allows a factory quality finish. Paint options are: Satin Black or Colour-Matched. Satin Black hoops are also available with Colour-Matched bars.

Our bar can be supplied in standard, 1″ and 2″ body lift configurations and adding to the versatility of the Ambush range mounts will be available to purchase separately, thus allowing adding or removing of body lift to accommodate bar position.

An infill is supplied with every bar and to add contrast is finished in charcoal grey. This unique addition is the PSR “Pre-Runner” infill.

Twin aerial mounts are also included as standard!

All Ambush Bars are compatible with the PSR Modulight range of LED lightbars. Click here to check them out now!